APM:Copter - Connecting your components
The documentation uses a Crius V2 as example flight controller, but the Pin number is the same for all flight controllers.
Connecting the RC Input
By default MegaPirateNG uses PPM RC Input.
Connect your PPM RC Receiver to Pin A8 on your flight controller.
If you want to use a non PPM RC Receiver you need to change your RC Input Type Configuration and connect the RC Receiver like this.
| Pin | Channel |
|---|---|
| A8 | Yaw / Rudder |
| A9 | Pitch / Elevator |
| A10 | Throttle |
| A11 | Aileron |
| A12 | Mode Switch |
Connecting Motors
Quad-Copter in + and X configuration
Tri-Copter
Hexa-Copter
Octo-Copter
V Octo-Copter, Y6 and X8
